How do I set up the BioDrive iOS & PC Apps?
Setup KX906 Smart Token Before Using BioDrive!

Download the BioDrive user manual here.
https://keyxentictoken.com/kx906_biodrive_app_usermanual_v1-0-2/

Before using encryption disk of BioDrive, the following procedures must be setup completely in advance.

1. Generate “Disk Encryption Key” Generation of disk encryption key is supported since iOS KX906 Kits App v1.0.31 .

(1) Connect KX906 Smart Token to iOS device by Lightning Connector.
(2) With successfully connected KX906 Smart Token, the App launch dialog will be prompted. If none of the launch dialog is shown more than 5 seconds, remove and plug again to connect.
(3) On App launch dialog, click “Ignore” to get into the KX906 Kits App main page.



(4) Generate disk encryption key by “Smart Token —> Key List —>New” function.



(5) Since the key is for disk encryption, do not forget to backup the key into backup smart card before next step.

2. Insert MicroSD Card into KX906 Smart Token
(1) Insert MicroSD card into KX906 Smart Token.
(2) Slide the switch to “Mass Storage” icon side.



3. Create secure disk partition by Windows version BioDrive application

Current version of Windows BioDrive is v1.3.0
(1) Open BioDrive



(2) Plug KX906 Smart Token into the Windows device through USB type A connector. With successful detection of KX906 Smart Token, the login dialog will then be prompted. Fingerprint login is set as default, press “Cancel” to login with PIN.



(3) With successful login, new partitions can be configured for MicroSD card within KX906 Smart Token. Input the volume size for encryption disk partition, the default value shown means the total MicroSD card capacity to be encrypted.



(4) With successful creation of new partition configuration, replug KX906 is required for formatting new partition setting.



(5) Replug KX906 Smart Token and login successfully. Format new partition through Windows default format mechanism. The default Windows format dialog will be prompted after successful login into BioDrive application.



(6) After successful format of new partition, encryption disk can be seen in file browser.



(7) After successful configuration of encryption disk, authentication by either fingerprint or PIN through BioDrive is required to see encryption disk whenever KX906 Smart Token is plugged into Windows OS with mass storage mode.



(8) Reset partition can be done by BioDrive after successful login.



After reset partition, terminate BioDrive application. Replug KX906 Smart Token is required and re-format will be asked by Windows system again to make the MicroSD card be a normal disk.

iOS BioDrive App
BioDrive provides AES 256 bits hardware encryption disk by fingerprint match on card (MoC) and PIN authentication. All keys and biometric patterns are protected by certified secure element built in KX906 smart token.

1. Connect with KX906 Smart Token

(1) Connect KX906 Smart Token to iOS device by Lightning Connector.
(2) With successfully connected KX906 Smart Token, the App launch dialog will be prompted. If none of the launch dialog is shown more than 5 seconds, remove and plug again to connect.
(3) On App launch dialog, click “Ignore” to get into the KX906 Kits App main page.



2. Authentication by fingerprint or PIN

When connecting with KX906 Smart Token, the default authentication flow will be fingerprint verification first. If the fingerprint verification failed, PIN verification will be triggered afterwards.



With successful authentication, volume information of public and private (Encrypted) disks will be shown correspondingly.



Authentication can be triggered again when click on unauthenticated “Private Disk” icon.



3. Storage access control

There are three types of storage in BioDrive iOS App. App storage (iOS device) , public and private (Encryption) disks in hardware external accessory (KX906 Smart Token). App storage and public disk are public and without authentication, fingerprint or PIN authentication is required before access to private disk.



4. File management

BioDrive App provides file copy, move, add photo from library and folder creation operations for file management.

(1) Add photo from library Add photo from album of iOS device to current storage folder.



(2) Create folder

Create folder in current storage folder.



(3) Delete, Copy and Move

Delete file by selection or swipe left.



Copy or move file from current storage folder to designated folder.



(4) Supported file preview

Tap on file to view the file content (Supported by iOS device).



Microsoft Windows BioDrive App

Windows ( Microsoft Windows 10 is recommended ) BioDrive provides the functions to create, reset and authentication by fingerprint or PIN code verification to open encrypted partitions ( MicroSD card within KX906 Smart Token ). Reference previous chapter for partition create and reset.

After successful setup for partition encryption of KX906 Smart Token. Windows version BioDrive provides the mechanism to open encrypted partition. The followings are procedures to open encryption disk. (1) Slide the switch to “Mass Storage” icon side.



(2) Open Windows BioDrive application.



(3) Plug KX906 Smart Token into Windows OS device. When KX906 Smart Token is detected, authentication by fingerprint or PIN verification to open encrypted partitions.



(4) After successful authentication, Windows system will mount the encrypted partition and BioDrive can be terminated. Whenever KX906 Smart Token is replugged into Windows OS device, at least once authentication through BioDrive is required to open encrypted partition. For partition without encryption, it just works as a normal USB removable device.


Last Updated: 16 Mar 2019
Did you find this article helpful?
0%
0%
Total votes: 0